available

Short Tee - Type 2D - 42,4 mm

zł11.47 tax incl

zł11.47 tax excl

90° butt joint, often used to join intermediate uprights to top rails and middle rails to end uprights on level sites.This clamp cannot be used where through tube (horizontal in photo) has to be joined within the fitting

available

Slope Short Tee 0 - 11° - Type 2SD - 42,4 mm

zł17.61 tax incl

zł17.61 tax excl

Butt joint for sloping sites, adjustable from 0° to 11°, often used to join intermediate uprights to top rails and middle rails to end uprights. This clamp cannot be used where through tube (sloping in photo) has to be joined within the fitting.

available

Long Tee - Type 4D - 42,4 mm

zł19.60 tax incl

zł19.60 tax excl

90° joint, often used to join intermediate uprights to top rails on level sites. This clamp can be used where through tube (horizontal in photo) has to be joined within the fitting. Where such a joint is not required, type 2 can often be used as an alternative.

available

Slope Long Tee 0 - 11° - Type 4SD - 42,4 mm

zł28.37 tax incl

zł28.37 tax excl

Adjustable for slopes from 0° to 11°, often used to join intermediate uprights to top rails and middle rails to end uprights. This clamp can be used where through tube (sloping in photo) has to be joined within the fitting.

available

Internal Swivel Tee - Type 5D - 42,4 mm

zł15.62 tax incl

zł15.62 tax excl

Short Tee 45°. Forms a connection between two tubes at an angle of 45°.

available

90° Elbow - Type 6D - 42,4 mm

zł14.51 tax incl

zł14.51 tax excl

90° angle joint, often used where top rail meets end upright on level sites.

available

Variable Elbow 90° - Type 6SD - 42,4 mm

zł20.36 tax incl

zł20.36 tax excl

Variable 0° to 11° angle joint, often used to join staircase top rail to upright at top end of staircase

available

Adjustable Short Tee - Type 7D - 42,4 mm

zł20.42 tax incl

zł20.42 tax excl

Adjustable from 30° to 60°, often used on staircase top rails and braces. The through tube (sloping in photo) cannot be joined within the fitting.

available

External Sleeve Joint - Type 8D - 42,4 mm

zł13.34 tax incl

zł13.34 tax excl

A straight fitting for joining tubes of the same size. Dependent on load requirements, type 9 may sometimes be used as an alternative, particularly where a more flush joint is required

available

Internal Expanding Joint - Type 9D - 42,4 mm

zł12.05 tax incl

zł12.05 tax excl

A straight fitting for joining tubes of the same size. This fitting can only be used for 3.25mm wall thickness tube (1”, 1 1/4” & 1 1/2” BS EN 10255, formerly BS 1387, medium weight) and must not be used as a load bearing joint, particularly for tensile loads. Type 8, which has superior load characteristics, may sometimes be used as an alternative.

available

Wall Flange - Type 10D - 42,4 mm

zł13.86 tax incl

zł13.86 tax excl

Positional fixing flange which is often used where rails meet walls on level sites.Warning: This clamp fitting is not recommended as a baseplate to support handrailing, guardrailing, parapets, balustrades or other structures.

available

Railing Base Flange - Type 12D - 42,4 mm

zł27.38 tax incl

zł27.38 tax excl

Base flange, usually used for uprights on level sites. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. Warning: To achieve optimum load characteristics, this fitting should be fitted so that the fixing holes are in line with the applied load.

available

Slope Base Flange 0° - 11° - Type 12SD - 42,4 mm

zł27.38 tax incl

zł27.38 tax excl

Base flange for sloping sites, adjustable from 0° to 11°, usually used for guardrail and wheelchair ramp uprights. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request.To achieve optimum load characteristics, this fitting should be fitted so that the fixing holes are in line with the applied load.

available

Heavy Duty Side Support (Horizontal Base) - Type 13D - 42,4 mm

zł35.63 tax incl

zł35.63 tax excl

A palm-type fitting, often used to attach guardrail uprights to walls, staircases and ramps. In standard form, the tube cannot pass through the bottom of the fitting, although the fitting may be modified to accommodate this at extra cost. Dependent on load requirements, type 14 may sometimes be used as an alternative.

available

Heavy Duty Side Support (Vertical Base) - Type 14D - 42,4 mm

zł38.08 tax incl

zł38.08 tax excl

A palm-type fitting, often used to attach guardrail uprights to walls, staircases and ramps. In standard form, the tube cannot pass through the bottom of the fitting, although the fitting may be modified to accommodate this at extra cost.N.B. Access to one of the fixing holes is limited and may restrict the length and type of fixing that may be used. Dependent on load requirements, type 13 may sometimes be used as an alternative.

available

Corner (Top Rail) - Type 18D - 42,4 mm

zł19.66 tax incl

zł19.66 tax excl

90° corner joint, often used where top rail meets corner upright on level sites.

available

Corner (Middle Rail) - Type 20D - 42,4 mm

zł16.50 tax incl

zł16.50 tax excl

90° corner joint, often used on middle rail on level sites and often paired with type 18. The through tube (vertical in photo) cannot be joined within the fitting.

available

Cross (Middle Rail) - Type 22D - 42,4 mm

zł19.13 tax incl

zł19.13 tax excl

90° joint, often used between middle rail and uprights on level sites and often paired with type 2 or 4. The through tube (vertical in photo) cannot be joined within the fitting.

available

Slope Cross (Middle Rail) (0° - 11°) - Type 22SD - 42,4 mm

zł23.17 tax incl

zł23.17 tax excl

Adjustable for slopes from 0° to 11°, often used between middle rail and uprights on sloping sites and often paired with type 2S or 4S. The through tube (vertical in photo) cannot be joined within the fitting.

available

Adjustable Cross (Middle Rail) (30° - 45°) - Type 23D - 42,4 mm

zł28.26 tax incl

zł28.26 tax excl

Adjustable from 30° to 45°, this clamp fitting is often used where middle rails on staircases meet intermediate uprights. The through tube (vertical in photo) cannot be joined within the fitting

available

Side Outlet Tee - Type 24D - 42,4 mm

zł22.76 tax incl

zł22.76 tax excl

Often used in large tubular structures with the upright passing through the fitting. The through tube (horizontal in photo) cannot be joined within the fitting.

available

Adjustable Long Tee (30° - 45°) - Type 27D - 42,4 mm

zł24.69 tax incl

zł24.69 tax excl

Adjustable from 30° to 45°, often used on staircase top rails. This clamp can be used where the top rail must be joined at the fitting. Where such a joint is not required, type 23 can often be used as an alternative. Often used in conjunction with type 130.

available

Crossover - Type 28D - 42,4 mm

zł12.81 tax incl

zł12.81 tax excl

Designed to form a 90° crossover joint between two tubes, this fitting can reduce the need for cutting on horizontal rails. To add to existing structures, types 28O and 33 can often be used as alternatives.

available

Clamp-on Tee (2 Bolt) - Type 31OD - 42,4 mm

zł17.73 tax incl

zł17.73 tax excl

90° bolt-on joint, often used to make additions or alterations to existing structures where a type 2 or similar cannot be fitted. Type 31O is a similar clamp-on fitting. The through tube (horizontal in photo) cannot be joined within the fitting

available

Clamp-on Tee (1 Bolt) - Type 32D - 42,4 mm

zł13.46 tax incl

zł13.46 tax excl

90° bolt-on joint, often used to make additions or alterations to existing structures where a type 2 or similar cannot be fitted. Type 31O is a similar clamp-on fitting offering a more flush finish. The through tube (horizontal in photo) cannot be joined within the fitting.

available

Clamp-on Crossover - Type 33D - 42,4 mm

zł11.76 tax incl

zł11.76 tax excl

Designed to form a 90° joint between two tubes. Often used to add to existing structures. Type 28O can often be used as a clamp-on alternative, or type 28 can often be used as an alternative on new structures.

available

Handrail wall bracket - Type 34D - 42,4 mm

zł10.24 tax incl

zł10.24 tax excl

Often used to attach to walls, as a positional wall fixing for structures, or to attach kick-plates to uprights. The tube cannot be joined within the fitting.

available

Single Swivel Combination Male Part - Type 36D - 42,4 mm

zł9.01 tax incl

zł9.01 tax excl

Single lugged fitting. Can be supplied pre-assembled to type 173F to form type 173. Dependent on load requirements, this fitting may sometimes be used to fix flat sheets to tubes. The tube cannot be joined within the fitting.Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.

available

Double Swivel Male Part - Type 38D - 42,4 mm

zł9.77 tax incl

zł9.77 tax excl

Double lugged fitting. The tube cannot be joined within the fitting.Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.

available

Single Swivel Combination Female Part - Type 42D - 42,4 mm

zł11.70 tax incl

zł11.70 tax excl

Versatile fitting with a multitude of uses. Can be supplied pre-assembled with other fittings to form types 46, 48, 51 and 44.Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.

available

Single Swivel Combination - Type 44D - 42,4 mm

zł17.43 tax incl

zł17.43 tax excl

A versatile swivel fitting, useful for awkward applications where angles cannot be accommodated by adjustable angle fittings. The through tube (sloping in photo) cannot be joined within the fitting. The assembly is riveted together, although items can be supplied separately as 36 and 42.

available

Double Swivel Connection - Type 46D - 42,4 mm

zł34.05 tax incl

zł34.05 tax excl

A versatile swivel fitting, useful for awkward applications where angles cannot be accommodated by adjustable angle fittings. The assembly is riveted together, although items can be supplied separately as 38 and 2 x 42. The through tube (vertical in photo) cannot be joined within the fitting.Warning: To provide sufficient stability, whole structures must not be made from swivel fittings alone.

available

90° Corner Double Swivel Combination - Type 48D - 42,4 mm

zł33.11 tax incl

zł33.11 tax excl

A versatile swivel fitting, useful for awkward applications where angles cannot be accommodated by adjustable angle fittings. The through tube (vertical in photo) cannot be joined within the fitting. The assembly is riveted together, although items can be supplied separately as 40 and 2 x 42.Warning: To provide sufficient stability, whole structures must not be made fromswivel fittings alone.

available

Swivel Short Tee - Type 49D - 42,4 mm

zł11.64 tax incl

zł11.64 tax excl

A versatile fitting, usually used in pairs. Although the photo shows two fittings, this item is sold and priced individually. The through tube (vertical in photo) cannot be joined within the fitting.Image shows 2 fittings.

available

Swivel Wall Fixing - Type 51D - 42,4 mm

zł19.89 tax incl

zł19.89 tax excl

A versatile swivel fitting, useful for fixing angled tubes to walls etc. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The assembly is riveted together, although items can be supplied separately as 42 and 50.

available

Side Palm - Type 53D - 42,4 mm

zł32.35 tax incl

zł32.35 tax excl

A palm-type fitting, often used to attach guardrail uprights to walls, staircases and ramps. In standard form, the tube cannot pass through the bottom of the fitting, although the fitting may be modified to accommodate this at extra cost (with loss of use of bottom bolt hole).

available

Ground Socket - Type 54D - 42,4 mm

zł89.39 tax incl

zł89.39 tax excl

A setscrew allows the upright to be removed when required, the fitting remaining cast in place.

available

Single-Lugged Bracket - Type 55D - 42,4 mm

zł9.42 tax incl

zł9.42 tax excl

Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The tube cannot be joined within the fitting.

available

Double-Lugged Bracket - Type 56D - 42,4 mm

zł14.74 tax incl

zł14.74 tax excl

Often used for mounting boards practically flush with tubes. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The tube cannot be joined within the fitting.

available

Locking Ring - Type 60D - 42,4 mm

zł4.39 tax incl

zł4.39 tax excl

Often used with other fittings to increase slip load capacity or to support other fittings which are left to rotate freely on tube to form swivels, hinges etc. The tube cannot be joined within the fitting.

available

Hook - Type 61D - 42,4 mm

zł8.19 tax incl

zł8.19 tax excl

Usually used where chains need to be easily removed for access. The tube cannot be joined within the fitting

available

Gate Eye - Type 62D - 42,4 mm

zł7.08 tax incl

zł7.08 tax excl

Often used with type 63 to form gate hinges. The tube cannot be joined within the fitting.

available

Gate Hinge Pin - Type 63D - 42,4 mm

zł9.18 tax incl

zł9.18 tax excl

Often used with type 62 to form gate hinges. The tube cannot be joined within the fitting.

available

Single Mesh Panel Clip - Type 70D - 42,4 mm

zł3.98 tax incl

zł3.98 tax excl

For attaching mesh panels to one side of tube. For double-sided clips, please refer to type 71. This fitting may also be used without the small return part to secure certain other types of sheet material to tubes eg. Board. The tube cannot be joined within the fitting.N.B. This item is manufactured from steel, not malleable iron.Please note that bolts are BZP coated.

available

Double Mesh Panel Clip - Type 71D - 42,4 mm

zł4.62 tax incl

zł4.62 tax excl

For attaching mesh panels to both sides of tube. For single-sided clips, please refer to type 70. This fitting may also be used without the small return part to secure certain other types of sheet material to tubes eg. Board. The tube cannot be joined within the fitting.N.B. This item is manufactured from steel, not malleable iron. Please note that bolts are BZP coated.

available

Table top mounting holder - Type 100D - 42,4 mm

zł5.15 tax incl

zł5.15 tax excl

Saddle Clamp. Our steel cap brackets are electrolytically galvanized and therefore rust-resistant. These so-called single-lip cover brackets are available for tube sizes 21.3 mm up to 60.3 mm. Extremely suitable for mounting blades on a tubular frame base.

available

Variable Elbow 15° - 60° - Type 124D - 42,4 mm

zł20.48 tax incl

zł20.48 tax excl

Elbow connector as an end stop for the upper railing with a variable angle of 15 ° to 60 °. Mostly used for vertical columns for stairs.

available

Adjustable Knuckle - Type 125D - 42,4 mm

zł25.39 tax incl

zł25.39 tax excl

A versatile fitting, often used where a horizontal rail is joined to a sloping section. Once the desired angle is obtained, the knuckle is secured with a standard setscrew.

available

Extra Heavy Duty Side Support (Horizontal Base) - Type 146D - 42,4 mm

zł39.14 tax incl

zł39.14 tax excl

Designed to be interchangeable with traditional welded ball standard bases. Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request.

available

Metall Stop End - Type 73D - 42,4 mm

zł6.49 tax incl

zł6.49 tax excl

Aluminium alloy stop end.

available

Reducing Short Tee - Type 2VDC - 42,4-33,7 mm

zł11.93 tax incl

zł11.93 tax excl

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters.

available

Reducing Short Tee - Type 2VDE - 42,4-48,3 mm

zł14.27 tax incl

zł14.27 tax excl

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters.

available

Reducing Short Tee - Type 2VED - 48,3-42,4 mm

zł13.16 tax incl

zł13.16 tax excl

Reducing Short Tee. Used as Type 2. Rediction fitting makes it possible to design structures in two different tube diameters.

available

Four Socket Cross - Type 26D - 42,4 mm

zł33.35 tax incl

zł33.35 tax excl

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp.

available

Reducing Crossover 90° - Type 28VDC - 42,4-33,7 mm

zł12.69 tax incl

zł12.69 tax excl

Reducing Crossover 90°. Used as Type 28. reduction fitting makes it possible to design structures in two different tube diameters.

available

Reducing Crossover 90° - Type 28VED - 48,3-42,4 mm

zł15.27 tax incl

zł15.27 tax excl

Reducing Crossover 90°. Used as Type 28. reduction fitting makes it possible to design structures in two different tube diameters.

available

Add-on Crossover 90° - Type 28OD - 42,4 mm

zł18.66 tax incl

zł18.66 tax excl

Add-on Crossover 90°. Same tubefitting as type 28 but this tubefitting can be placed on an existing construction by means of a foldable part.

available

Combi Socket Tee and Cross - Type 30D - 42,4 mm

zł20.36 tax incl

zł20.36 tax excl

Combi Socket Tee and Cross. Frequently used for racking. Upright hole can be changed according to the application. For shelved racking the outside hole is the upright, and for pallet racking the upright is inside the carrying rails.

available

90° Double Swivel Male Part - Type 40D - 42,4 mm

zł8.89 tax incl

zł8.89 tax excl

Male Corner Lug 90°. Similar to Type 36 with two lugs which are perpendicular to each other.

available

Coat hook - Type 64D - 42,4 mm

zł8.19 tax incl

zł8.19 tax excl

Coat hook. Similar to tube coupling type 61, but better suited for making coat hangers and the like.