pl
de
en
it
es
fr
nl
My account
+48 68 888 02 33
Kee Safety® safety railings and guardrails
Four system solutions for your facility.Kee Safety® provides complete solutions for protecting roofs, walkways, ramps, stairs and hazardous areas.
- Kee Klamp® – modular fittings for tubular structures.
- Kee Lite® – lightweight aluminium fittings for tubular structures.
- Kee Kwik® – ready-to-install railing kits for quick assembly.
- KeeGuard® – free-standing roof guardrails.
Choose the right solution
Below you will find a brief overview of each of the four product lines. If you are not sure which system is suitable for your facility, describe your project in the contact form — we will recommend the right configuration.
Kee Klamp® — modular fittings for custom structures
The widest range of malleable cast iron fittings, hot-dip galvanized in accordance with PN-EN ISO 1461. The best choice when the railing, guardrail or rack is to be individually designed and assembled on site using tubes cut to size.
See the Kee Klamp fittings →Kee Lite® — lightweight aluminium alternative
An aluminium alternative to Kee Klamp® fittings, compatible with the same tubes in standardized diameters. The lower weight of the structure and attractive finish make the system suitable for handrails, internal guardrails and structures where low weight is important.
Ask about Kee Lite solutions →Kee Kwik® — ready-to-install kits for quick assembly
Pre-assembled posts and standard railing sections (straight, corner and intermediate), as well as dedicated kits for stairs, ramps and around columns. The fastest way to install a certified railing without designing the structure from scratch — with no drilling or welding.
Ask about Kee Kwik solutions →KeeGuard® — free-standing roof guardrails
A counterweighted system mounted on ballast weights — with no drilling or interference with the roof covering. Designed to protect the edges of flat roofs: concrete, PVC, membrane, bitumen, trapezoidal sheet metal and standing seam roofs.
Ask about KeeGuard solutions →Kee Safety® - safety railing systems
Kee Safety® is a family of systems designed for safe railings, guardrails and protective barriers. The solutions are used in industrial facilities, warehouses, on roofs, stairs, ramps and walkways.
Depending on the application, you can choose one of four systems:
- Kee Klamp® – modular fittings for individually designed railings and guardrails.
- Kee Lite® – lightweight aluminium solutions for structures where low weight and aesthetics are important.
- Kee Kwik® – ready-to-install railing kits designed for quick assembly.
- KeeGuard® – free-standing roof guardrails for protecting roof edges without drilling into the roof covering.
The systems differ in design and application, but they share the same principle: quick installation without welding. Their modular design allows the solution to be adapted to the specific location and required level of protection.
Why choose Kee Safety® safety railings?
Regardless of which system you choose, you get a solution based on the same, consistent Kee Safety® design philosophy — supported by independent certifications and proven in thousands of industrial installations worldwide.
Common modular design
Kee Klamp®, Kee Lite® and Kee Kwik® are based on the same fittings and tubes with standardized diameters, making it easier to expand structures and combine components between systems.
Installation without welding
All four product lines are assembled using an Allen key or torque wrench — without welding, threading or specialist qualifications.
A solution for every application
Roof edges, internal transport routes, ramps, stairs, mezzanines or machinery areas — you can find a dedicated configuration for every application.
High structural load capacity
Connecting components can withstand loads significantly exceeding the minimum requirements of the standards — up to 1500 N/m compared with the required 300 N/m.
Corrosion resistance
Hot-dip galvanized cast iron, aluminium and steel protected in accordance with PN-EN ISO 1461 ensure long-lasting system performance both indoors and outdoors.
Available from stock
Basic fittings, tubes and ready-to-install kits are available from our warehouse, shortening lead times for safety system projects.
Project gallery
Compliance with standards and requirements
All Kee Safety® safety railing systems have been independently tested and meet or exceed the requirements of European and international standards for collective fall protection and guardrail construction.
Frequently asked questions
What is the difference between Kee Klamp, Kee Lite, Kee Kwik and KeeGuard?
Kee Klamp® and Kee Lite® are modular fittings (cast iron and aluminium respectively) for building individually designed structures. Kee Kwik® consists of pre-assembled, ready-to-install railing kits made using the same fittings. KeeGuard® is a separate system of free-standing roof guardrails mounted on ballast weights, without interfering with the roof covering.
Which system should I choose for protecting the edge of a flat roof?
The KeeGuard® system is designed for this application — installed without drilling, based on the counterweight principle, and suitable for concrete, membrane, bitumen, trapezoidal sheet metal and standing seam roofs.
Does the installation of any of the railings require welding?
No. All four systems — Kee Klamp®, Kee Lite®, Kee Kwik® and KeeGuard® — are installed using an Allen key or torque wrench, without welding, threading or specialist installation qualifications.
What is the difference between Kee Lite and Kee Klamp?
Kee Lite® is an aluminium alternative to Kee Klamp® fittings, compatible with the same tubes. It provides a lower structural weight and an attractive finish without additional corrosion protection, at the cost of slightly lower load capacity compared with the cast iron version.
Can Kee Safety systems be combined?
Kee Klamp®, Kee Lite® and Kee Kwik® are based on the same standardized tube diameters, allowing them to be combined and expanded within a single structure. KeeGuard® is a separate system dedicated exclusively to protecting roof edges.
How can I request a quote for the appropriate railing system?
Simply complete the contact form below, describing the installation location (roof, industrial hall, warehouse, ramp) and approximate dimensions. Our team will recommend the appropriate system and prepare an individual quotation.
Kee Safety® safety railings – downloads
| Document name | Format | Link |
|---|---|---|
| General brochures and catalogues | ||
| Brochure: Kee Safety company portfolio – full product range |  | Download |
| Catalogue: Safety guardrails and industrial safety barriers | | Download |
| Catalogue: Kee Klamp® & Kee Lite® tube fittings | | Download |
| Brochure: Kwik Kit & Kee Module industrial railings and safety barriers | | Download |
| Brochure: KeeGuard® free-standing ballast roof edge protection | | Download |
| CERAM certificate – free-standing railings PN-EN 13374 Class A | | Download |
Need help choosing the right system?
Describe what you want to protect and provide approximate dimensions. This could be a roof, production hall, warehouse, ramp, stairs, a walkway or any other potentially dangerous area.
We also provide technical support, including advice on selecting the system and the possibility of reviewing designs for compliance with applicable standards.