available

Short Tee - Type 2BD - 42,4 mm

zł14.98 tax incl

zł14.98 tax excl

Short Tee. Provides a perpendicular connection between two tubes. Top fitting for straight and level railing uprights. This fitting cannot be used to join horizontal tube within the fitting. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Long Tee - Type 4BD - 42,4 mm

zł24.51 tax incl

zł24.51 tax excl

Long Tee. Similar to Type 2. This fitting can be used where a join is required in the horizontal tube. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

90° Elbow - Type 6BD - 42,4 mm

zł13.98 tax incl

zł13.98 tax excl

Elbow 90°. Elbow joint fitting used as an end fitting for the top rail. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

External Sleeve Joint - Type 8BD - 42,4 mm

zł17.08 tax incl

zł17.08 tax excl

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Internal Expanding Joint - Type 9BD - 42,4 mm

zł17.08 tax incl

zł17.08 tax excl

Straight Coupling. Joint clamp for tubes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Wall Flange - Type 10BD - 42,4 mm

zł15.62 tax incl

zł15.62 tax excl

Flange. This clamp is used on structures where positional fixing is required. Do not use as a base flange to support guard railings or similar systems. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Railing Base Flange - Type 12BD - 42,4 mm

zł34.63 tax incl

zł34.63 tax excl

Railing Base Flange. Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Corner (Top Rail) - Type 18BD - 42,4 mm

zł25.80 tax incl

zł25.80 tax excl

Three Way Top Corner. Corner joint (90°) clamp used for top rail corners and any other rectangular system. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Corner (Middle Rail) - Type 20BD - 42,4 mm

zł19.71 tax incl

zł19.71 tax excl

Corner with Trough Tube 90°. Often used on intermediate rail corners to match Type 18, tube passes through the clamp. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Cross (Middle Rail) - Type 22BD - 42,4 mm

zł19.36 tax incl

zł19.36 tax excl

Two Socket Cross. 90° joint clamp between the middle rail and an upright on railings. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Side Outlet Tee - Type 24BD - 42,4 mm

zł28.90 tax incl

zł28.90 tax excl

Side Outlet Tee. 3-direction clamp used to fix uprights with 3 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Center Cross - Type 26BD - 42,4 mm

zł44.34 tax incl

zł44.34 tax excl

Four Socket Cross. 4-direction clamp used to fix uprights with 4 horizontal tubes that are perpendicular to each other. Upright tube passes through the clamp. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Crossover - Type 28BD - 42,4 mm

zł16.32 tax incl

zł16.32 tax excl

Crossover 90°. Crossover clamp (90°). Used for long tube intersections with uprights where decreasing cutting cost and increasing strength of the system with continuity of the tube is desired. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Clamp-on Tee (1 Bolt) - Type 32D - 42,4 mm

zł18.08 tax incl

zł18.08 tax excl

Short Tee. Provides a perpendicular connection between two tubes. Top fitting for straight and level railing uprights. This fitting cannot be used to join horizontal tube within the fitting. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Clamp-on Crossover - Type 33BD - 42,4 mm

zł15.15 tax incl

zł15.15 tax excl

Clamp-On Crossover. 90° crossover joint fitting for adding to an existing structure. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Handrail wall bracket - Type 34BD - 42,4 mm

zł16.97 tax incl

zł16.97 tax excl

Handrail Support. For fixing handrails and structures to walls. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Single Swivel Combination Male Part - Type 36BD - 42,4 mm

zł11.70 tax incl

zł11.70 tax excl

Male Single Lug. Used with Type 42 for swivel fittings, also used for fixing panels and boards. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Double Swivel Male Part - Type 38BD - 42,4 mm

zł12.52 tax incl

zł12.52 tax excl

Male Single Lug. Used with Type 42 for swivel fittings, also used for fixing panels and boards. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Single Swivel Combination Female Part - Type 42BD - 42,4 mm

zł15.03 tax incl

zł15.03 tax excl

Female Single Socket. One part of swivel fitting, not generally used alone. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Single Swivel Combination - Type 44BD - 42,4 mm

zł22.17 tax incl

zł22.17 tax excl

Single Swivel. Swivel fitting for variable angle fixing. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Swivel Short Tee - Type 49BD - 42,4 mm

zł14.98 tax incl

zł14.98 tax excl

Adjustible Swivel Tee. Always used in pairs to allow angle variation between 97° - 270° (min/max angle) Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Single-Lugged Bracket - Type 55BD - 42,4 mm

zł15.62 tax incl

zł15.62 tax excl

Collar Plate Single Side. Front adjustment scew. Fitting for panel fixing. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Double-Lugged Bracket - Type 56BD - 42,4 mm

zł18.84 tax incl

zł18.84 tax excl

Collar Plate Single Side. Front adjustment scew. Fitting for panel fixing. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Locking Ring - Type 60BD - 42,4 mm

zł5.85 tax incl

zł5.85 tax excl

Collar. Support fitting to increase slip resistance of fi ttings that are under high loads. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Hook - Type 61BD - 42,4 mm

zł12.81 tax incl

zł12.81 tax excl

Collar. Support fitting to increase slip resistance of fi ttings that are under high loads. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Gate Eye - Type 62BD - 42,4 mm

zł9.18 tax incl

zł9.18 tax excl

Eye Hinge. Female hinge fitting, for type 63 Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

available

Gate Hinge Pin - Type 63D - 42,4 mm

zł11.82 tax incl

zł11.82 tax excl

Eye Hinge. Female hinge fitting, for type 63 Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

Square base plate - Type 11BD - 42,4 mm

zł18.43 tax incl

zł18.43 tax excl

Square base plate. Use this tubefitting for positioning constructions. Due to the shape of the base plate, it can be fixed nicely on a surface at a 90° angle. Do not use it as a base for supporting safety railings or similar contructions. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

• On sale!

Coat hook. Hook 90° narrow - Type 64BD - 42,4 mm

zł10.65 tax incl

zł10.65 tax excl

Coat hook. Hook 90° narrow. Similar to tubefitting type 61, but better suited for making coat hangers and the like. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

• On sale!

Metall Stop End - Type 73BD - 42,4mm

zł8.48 tax incl

zł8.48 tax excl

Metal Plug. Aluminum cap used to plug the end of the tube. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.

• On sale!

available

Stainless steel set screw for tubefittings - Type 76B-DEF - 42,4-60,3 mm

zł3.04 tax incl

zł3.04 tax excl

Stainless steel set screw for tubefittings. Another big plus of the black coating is, that the color gets into the material really deeply, which prevents the connectors from corroding too quickly. The paintwork is not resistant to UV radiation and is therefore not suitable for outdoor use. The tubefittings are equipped with black colored stainless steel adjusting screws with cutting edge.