Of course. It is a universal solution - it can be used both indoors and outdoors

The legs of the wall are terminated with a ring connector having a lug with an eyelet of 10 mm. They can be used to drive the anchor into the ground or screw it to the ground for additional stabilization. You can also load down the ends of the legs of the structure.

For walls exceeding the dimensions 200x200 cm, additional vertically fixed reinforcing pipes are used. The reinforcement tube is fixed using crossover joint fittings so that the reinforcement is placed under the advertising banner. In the case of mounting double-sided banners, it should be remembered that the reinforcing pipe will obscure the banner print on one side (the larger the wall, the greater the number of reinforcements used in the structure)

Yes, we can also prepare size-customized presentation cubes.

For standard tensioners with a hook, the frame should be made about 25 cm larger.

For stormfix tensioners, the frame must have a dimension 15 cm larger than the banner.

The largest dimension of a presentation wall banner frame is 500x300 cm

We recommend to eyelet the banner at every 25-30 cm. The frequently used standard of 50 cm does not provide adequate tension of the outer edges of the banner.

Yes. We also offer the possibility of making an advertising banner with printout, edge sealing and eyeletting.

No. Preparation of graphic designs is on the customer's side. We provide a specification for the preparation of graphic files. It is a helpful guideline on how to properly prepare a graphic file for printing.

The graphic file should be in PDF format, as standard the fonts should be converted to curves or a file with flattened layers should be sent.

Color mode for CMYK recording as standard.

The maximum file weight is 500 MB.

Files for dimensions exceeding 500 cm on the sides should be scaled in a 1:10 ratio while maintaining a correspondingly higher resolution (so that once the file is scaled on the printing machine to the correct size the quality does not worsen below the minimum required parameters).

The pipes of the structure are shipped in packages with a length of 200 cm secured with foil.

The weight of a single package is usually about 15 kg.

The pipe fittings necessary to assemble the pipes are shipped separately in cardboard boxes.

Files not exceeding 20MB should be sent to the e-mail address. Larger files are best uploaded as a download link (a file placed on a server with a link generated e.g. via the "www.wetransfer.com" service)

No. Tensioners must be purchased separately. We offer stormfix or hook tensioners. For stormfix tensioners, the installation of banner corner eyelets will be more aesthetic if you additionally equip yourself with 4 stormfix corner tensioners.

In case of hook tensioners, the distance between the edge of the banner and the inner part of the frame pipe is 8 cm.

In case of stormfix tensioners, the distance is minimized and is 3 cm, which allows for better use of the surface of the banner frame and better aesthetics of the product.